|
|
PA-2410B
2.4GHz Bi-directional Amplifier
| PA-2410B 2.4GHz Bi-directional Amplifierfor Backhaul & Wi-Fi
802.11g/802.11b | | | | | | | | Features and Advantages |  | 802.11g/802.11b | | RF output power amplifier, available for all 2.4GHz Access Point andBridge unit. No matter what RF power of the AP or Bridge unit, it comesout with 1 Watt RF output power after the PA-2410 set is applied. | | Extendingsignal transmission for 10Km~25Km. | | TX/RX LEDs Indication. | | Auto gain adjustment. (AGC) | | Outdoorunit, weather proof. | | DC powerfeed through RF cable (POE) | | Immediate,low-cost, easy solution for magnifying the limited RF output power ofthe existing AP or Bridge device to 1 Watt (30dBm). | | | | | | Specifications | | Output power
| 1 Watt
| | Frequency Range
| 2400~2500Mhz
| | Max. Coverage
| 25Km
| | Antenna type
| Omni,flat panel, parabolic grid
| | Transmit Gain
| Up to24dB
| | Receiver Gain
| 15~18dB, 17 dB typical
| | TX Input Power
| 0 dBm ~23 dBm (Max)
| | Noise Figure
| 3.5 dBtypical
| | Connectors
| N-type,50 Ohm
| | Power Consumption
| TX:<1A / RX: 160mA @ 9 VDC
| | Power source
| AC 110~220V
DC 12V/2A
| | LED Indication
| Transmit: Green / Receive: Red
| | Operating Temperature
| -40 C ~ + 70 C
| | Dimensio
| 142x79x31mm(AMP)
142x79x31mm (DC injector)
| | Weight
| 1.5Kg/set | | | | | POE (Powerover Ethernet) Design | - True Outdoor unit, weather-proof, operating under–35C ~ 70C
- Least gain loss of antennas, highest transmissionefficiency
- POE (Power over Ethernet) design, best performancewith most stability
| | 
| |
|
|
